Expersys AD48

Description

AD48 is a digital audio signal processing device where it converts analog signal from the multi channel input into a digital signal, performs a series of tunable algorithms on the digital signal to meet the needs of speaker DSP demands and is output through a digital to analog conversion on the 8 available outputs

AD48 Characteristics:

4 Input 8 Output over XLR Connectors.
Full Digital Signal Processing capabilities.
LCD Status screen.
Signal Input and Output indicators.
Mute function on Input and Output for troubleshooting.
Remote Management software.

Specifications

Input Channels : 4 Input XLR Male
Output Channels : 8 Output XLR Female
Max Input Level : 18dBu
Max Output Level : 18dBu
Default Output Level : 0dBu
THD+N :
- < 0.003% ; 1kHz@+4dBu
- <0.0035% ; 1kHz@+10dBm
- <0.0035% ; 20Hz – 20kHz@+4dBu
Frequency Response : 20Hz – 20kHz, +/-0.2dB
In to Out dynamic range : 110dB (Unrecorded)
SN : -110dB (Unrecorded)
ADC Dynamic Range : CS5361 114dB
DAC Dynamic Range : CS4382A 114dB
DSP : 400Mhz floating – point SHARC ADSP-21488
Sampling Frequency : 48K
QE : 24Bit
Control : 100M Ethernet
Noise Gate : Yes
Feedback : Yes
Signal Generator : Yes
Pressure Limiter : Independent 12 Channels
Delay :
- Output 1-4 218ms
- Output 5-8 148ms
PEQ, Low Shelf, High Shelf : Independent 16 Band
Crossover :
- Independent 12 Channels
- High Pass and Low Pass
- -6dB/oct, -12dB/Oct, -18dB/Oct, -24dB/Oct, -36dB/Oct, -48dB/Oct
Filter Types : Bessel, Butterworth, Linkwitz-Riley
Power Requirements : 25W, AC 85VAC – 250VAC, 50/60Hz
Weight : 6KG